Wheel Stops
Wheel stops provide the ideal solution for controlling the kerb overhang where it is inconvenient or hazardous to pedestrians, inhibiting contact with an end barrier or high kerb and also inhibiting encroachment into an opposing car parking space.
We provide an environmentally friendly, cost effective solution which should be an essential inclusion in any car parking facility.
Constructed from recycled rubber, Australian Bollards’ AB-WS-1650 wheel stops are the economical, lightweight solution for controlling the travel of a vehicle into a parking space and preventing any obstruction or inconvenience to pedestrians. The one-piece construction means the wheel stops can be installed by one person and without the use of heavy lifting machinery.
Australian Bollards’ wheel stops comply with current Australian Standards AS2890.1:2004 for compliant physical dimensions in Australia. With a solid moulded construction and solid black and yellow stripes, these wheel stops will not chip, distort, disintegrate or corrode in various weather conditions and are resistant to UV, moisture, oil and extreme temperature variations, making them the ideal solution for both indoor and outdoor parking situations.
Australian Bollards – Wheel Stops protecting Tesla Superchargers from vehicle damage. Our wheel stops make it more efficient for drivers to park their vehicles appropriately without collision and charge their car’s.
Concrete Wheel Stops
Wheel stops are most commonly used in parking lots and underground car parks to prevent vehicles from colliding with other vehicles, buildings, garden beds or from obstructing pedestrian walkways.
NJM Group Australian Bollards’ concrete wheel stops are ideal for effective delineation of parking and for use in the protection of walls, vehicles and other valuables in all garages and surfaces parking applications.
Our AB-CWS concrete wheel stops are moulded in one piece and are reinforced with an internal steel rod for increased strength, durability and reliability. These wheel stops have bevelled front, back and sides to prevent being pushed over by a vehicle and have the ability to withstand heavy duty impact.
Australian Bollards’ range of wheel stops all comply with current Australian Standards AS2890.1:2004 for compliant physical dimensions in Australia. With pre-drilled holes, they can be installed on both concrete and asphalt surfaces using 2 x 200mm fixings to suit your specific site installation.
Galvanised Steel Wheel Stop
Wheel stops are generally used in car parking facilities to protect fixed assets such as walls, kerbs, garden beds and other vehicles, as well as to prevent pedestrian pathways from being blocked by vehicles.
Designed to withstand the conditions of Australia’s harsh climate, Australian Bollards’ AB-GWS1650-S steel wheel stops are heavy duty to withstand impact from vehicles.
As they are constructed using galvanised steel , these wheel stops will not chip, distort, disintegrate or corrode in various weather conditions and are resistant to UV, moisture, oil and extreme temperature variations, making them the ideal solution for both indoor and outdoor parking situations.
Australian Bollards’ steel wheel stops comply with current Australian Standards AS2890.1:2004 for compliant physical dimensions in Australia. NJM Group Australian Bollards’ premium wheel stops shall be between 90mm and 100mm in height, and a width of 1650mm +/-50mm.If wheel stops are provided to restrain vehicle contact with a kerb that is higher that 150mm or a wall, a further 200mm shall be added to the wheel stop distance in order to comply with Australian Standards.
We can customise any wheel stop solution for your car parking facility to suit your specific site requirements.